WHY BUY THIS PALLET JACK?
The Doosan HPT28-1 is an industrial hand pallet truck--built to handle industrial use. You may not need to read every detail about what goes into a building the HPT28-1 pallet jack, but you can see at a glance the attention to detail and quality that makes this one dependable, easy to use manual pallet truck.
DEPENDABILITY
Durable Industrial Product
Totally enclosed bearings
Steel drawbar with protected handle for safety and strength
Pivot mounted large polyurethane steer wheels
202° steer handle arc for easy maneuvering in confined spaces
Large polyurethane wheels are quiet & stable
Frame & Forks
Welded steel frame and forks
Heavy reinforcement at high load point areas
Rounded and tapered fork ends
Pallet entry and exit rollers
Easy access to all bearing points.
Hydraulics
Heavy duty w/chrome-plated pistons w/overload safety device
Load lowering valve
Easy access to replace and service hydraulic unit
Drawbar and Control Handle
Closed loop design control handle manufactured from steel
Drawbar gives perfect control & protects operator’s hands
Covered handle ensures positive control in all environments
Hydraulic hand control, 3 positions provide precise load control
Control handle allows for easy lowering pumping effort
Pump Unit
Fully enclosed pump seals out dirt and moisture
Chrome-plated ram & piston w/high quality polyurethane seals
Wheels and Bearings
Premium high-quality polyurethane steer and load wheels
All wheels fitted with sealed, lubricated precision bearings
Warranty
24 months; Hydraulic Pump
18 months: Chassis.
12 months: Axles for all models.
6 months: Wheels and Bearings
ASME
Standard truck meets all applicable mandatory requirements of Part II –ASME B56.10 Safety Standard for Manual Industrial Trucks.
Contact us today for more information or to get a new equipment quote.
Contact Information
Conditions of Warranty
Please do not send defective parts back to us unless you are requested to do. Should you have a warranty related issue, please contact Doosan Parts for additional instruction
For Your Safety
Do not operate or repair the Doosan hand pallet truck unless you have been trained and authorized. Read all warnings and instructions before operating the hand pallet truck.
Do not operate the Doosan hand pallet truck until you have checked its condition. Give special attention to the wheels, handle, forks, lift and lower controls. Do not operate a damaged or faulty truck.
Operate Doosan hand pallet truck only from the designated operating position. Never place any part of your body on the lifting mechanism or under the forks or load.
Do not carry passengers on the hand pallet truck.
Do not handle unstable or loosely stacked loads. Use special care when handling long, high or wide loads to avoid losing the load, striking bystanders, or tipping the truck.